Machine Parameters
| Device model |
SED-25YX-Z |
| Production capacity |
200,000-250,000 pcs /time |
| Spindle speed |
0.5-8 r/min |
| Dimensions |
3850*2400*2700mm |
| Drum size |
∅=1350mm L=2170mm |
| Equipment weight |
5500kg |
| Power supply |
380V |
| Pure steam |
0.2 5Mpa |
| Compressed air |
0.6~0.8Mpa |
| Vacuum suction |
＜-0.095MPa |
Technical Advantages
Technical advantages
(1) Discharging system
1)Fixed type. There are no rotating parts, and no friction particles will be generated to contaminate materials.
2)End-face transparent sight glass. It is convenient to observe the discharging situation and adjust the discharging speed at any time.
3)A separate washing sprayer is installed in the system, which can realize CIP and SIP.
(2) Main transmission system
1)The outlet of the traditional large rubber stopper washing machine has a tugboat that supports the front section of the equipment (to improve the overall force balance). The new rubber stopper washing machine adopts a dual-axis structure, which effectively avoids friction between the equipment and the supporting tugboat during operation.
2)The overall removal technology of the main washing tank is adopted to effectively keep the entire tank clean. It is mainly used during large-scale equipment maintenance.
(3) Drying system (the biggest advantage of the equipment)
Schematic diagram of new plate heat exchanger:
Risks of traditional hot air circulation system
1)The internal temperature of the circulating air duct cannot achieve the effect of dry heat sterilization when it is around 200°C.
2)The position between the high efficiency and the air inlet valve cannot be filtered by high efficiency or steam sterilized, and there is a risk of secondary contamination of the sterilized materials.
3)Most efficient hot air use compression sealing, which may cause leakage risks if improperly operated.
4)High-temperature and high-efficiency leak detection is much more complicated than air filter leak detection and is inconvenient to operate.
5)Taking the traditional hot air circulation rubber stopper washing machine as an example, the power of the heating tube is about 30KW, the running time of each batch of hot air is about 2 hours, and the power consumption is relatively large.
Traditional electric heating:
Heating with plate heat exchanger completely solves the above problems:
1)The air filter can be sterilize simultaneously with the pipeline to achieve online sterilization, avoiding the risk of contamination.
2)Using 226 fins is more convenient to replace
3)Leak detection process is easy to operate
4)Relatively low energy consumption
