Hangzhou SED Pharmaceutical Machinery Co.,Ltd.
Hangzhou SED Pharmaceutical Machinery Co.,Ltd. We know you have a choice. Thank you for choosing us.
Add to Cart
High Temperature Static Vacuum Pharmaceutical Dryer With GMP Certification
Product Description of Vacuum Drying Machine
The vacuum drying is the process that the raw material dried in the vacuum situation, and take out the wet moisture at the same time by vacuum pump. Usually for low temperature drying and solvent recovery, also can for different kind product drying, and reach GMP requirement.
Suitable for heat sensitive material that easy decomposed, polymerized and metamorphous under high temperature. It is widely used in pharmaceutical, chemical, food, electronics and other industries.
Product Parameters of Vacuum Drying Machine
| Item | Specification |
| Model | SED-10FZG-H |
| Interior size of chamber (mm) | 1500×1800×1220 |
| Exterior size of chamber (mm) | 1924×2500×1513 |
| Layers of baking shelf | 10 |
| Interval of baking shelf (mm) | 122 |
| Operation temperature of baking support | ≤150℃ |
| Weight (kg) | 3200 |
WORK PRINCIPLE of Vacuum Drying Machine
The so-called vacuum drying, that is, the material under vacuum conditions, heating drying. If the vacuum pump is used for pumping and dehumidifying, the drying speed is accelerated.
Note: if the condenser is used extra, the solvent in the material can be recycled through the condenser, such as the solvent is water. But it is okay not use the condenser for save cost.
The top adopt arch design, avoid the condensated water droping into drying chamber, so ensure a high drying efficiency in a low temperature.
Not only suitable for heat-sensitive material, also apply for the easy oxidized material. And can use for solvent retrieve, heating source is hot water steam or heat conducting oil.
It’s batch operation, so can adjust process condition anytime.
It’s operated in static vacuum state, so will not have any damage for the raw material.
Advantages of Vacuum Drying Machine
1. Under vacuum, the boiling point of the solution of the material is reduced, so that the heat transfer driving force of the evaporator is increased.
2. The heat source for evaporation operation can be made of low pressure steam, waste steam or electric heating tube. (supply customized hot water or oil, etc. heating source)
3. Less heat loss on evaporator.
4. Suitable for drying heat sensitive materials that easy decomposition, metamorphic and polymerization under high temperature.
5. The disinfection can be performed before drying treatment, cause no any impurities mixed in the drying process, meet the requirements of GMP.
6. The utility model belongs to a static vacuum drier, so the shape of the dry material can not be damaged.
Products Show of Vacuum Drying Machine
Application of Vacuum Drying Machine