Hangzhou SED Pharmaceutical Machinery Co.,Ltd.
Hangzhou SED Pharmaceutical Machinery Co.,Ltd. We know you have a choice. Thank you for choosing us.
Add to Cart
Three Phase Toothpaste Production Vacuum Pump Vacuum Emulsifying Machine With Hydraulic Lifting
Main Technical Data of Vacuum Emulsifying Machine
| Model No.: | LTRZ-600 |
| Total volume | 700L |
| Working volume | 600L |
| Homogenizing motor | 7.5 kw |
| Rotating speed | 1000-4000 r/min |
| Frame and scrapper motor | 2.2 kw |
| Rotating speed | 20-60 r/min |
| Emulsifying tank kettle motor | 0.4 kw |
| Working volume of the oil pot | 200L |
| Oil pot mixing motor | 1.5 kw |
| Working volume of the water pot | 450 L |
| Water pot mixing motor | 1.5 kw |
| Water circulation vacuum pump (KW) | 2.35 kw |
| Working pressure of the jacket | 0.25 MPa |
| Working pressure of tank | ≤0.09 MPa |
| Pressure of Compressed air | 0.6-0.7 MPa |
| Air compression consumption | 0.5 m3 /batch |
| Water consumption for jacket | 1.0 m3 /batch |
| Water consumption for cleaning | 0.8 m3 /batch |
| Hydraulic motor | 1.5 kw |
| Total power | 25 kw |
Working principle of Vacuum Emulsifying Machine
The SED-600RZ material are stirred by both the center blade and side scraper, which works on the inner surface of pot keeping stirring materials from being stuck onto the wall.
In the process of blade-stirring, the materials are continuously crushed, pressed, fold. Then the material is sent to the cut-off mixing unit where they are again cut off, broken and stirring by the strong interaction between running cutting wheel and cutting sheath.
The materials are finally crushed into small pellets of 200um~2um
Features of Vacuum Emulsifying Machine
1. The materials are sucked into emulsifying pot by transportation pipe under the vacuum state, or it also can be put from the feed inlet.
2. The material are stirred by both the center blade and side scraper, which works on the inner surface of pot keeping stirring materials from being stuck onto the wall. In the process of blade-stirring, the materials are continuously crushed, pressed, fold.
Then the material is sent to the cut-off mixing unit where they are again cut off, broken and stirring by the strong interaction between running cutting wheel and cutting sheath.
The materials are finally crushed into small pellets of 200um~2um. Besides, because of the vacuum in emulsifying pot, the bubbles generated during stirring and mixing process are sucked out from material.
3. The ex-circulating system can make the homogenizing more strong. The material within the pot can be give off only under the state of change direction of the control valves.
4. The temp controller on operation panel can adjust the temp of the homogenizer pot; The homogenizer stirring and the blade stirring cab be used simultaneously or dividedly;
The homogenizer stirring time can be set by the custom according to the different material. After finished the whole procession please rise the pot cover for the clearing.
Show of Vacuum Emulsifying Machine
